Lightweight board

Merton A/s offers a wide range of lightweight boards. We cooperate with several different suppliers.

Here is an overview of available core materials, which we can supply with veneer and laminates:

Facts

Lightweight furniture blockboard faced with veneer, 2.1 or 3.5 mm HDF board or fine chipboard (also available with foil for lacquering)
Thicknesses 13-60 mm (thicknesses over 60 mm are available on request)
Size 5,200/2,600 x 2,070 mm
Density approx. 300-320 kg/m² with veneer, approx. 380-490 kg/m³ with HDF (e.g. 19 mm with 2.1 mm HDF approx. 460 kg/m³ / e.g. 38 mm with 3.5 mm HDF approx. 420 kg/m³)

Lightweight furniture plywood board faced with veneer, 2.1 or 3.5 mm HDF board or fine chipboard
Thicknesses 13-60 mm (thicknesses over 60 mm are available on request)
Size 5,200/2,600 x 2,070 mm
Density approx. 370 kg/m² with barrier veneer

Lightweight furniture blockboard with Hydro-HDF (E 0.5) which absorbs less moisture than ordinary HDF board and makes the board very suitable for water-based lacquer
Thicknesses from 13-60 mm
Size 5,200/2,600 x 2,070 mm

Lightweight furniture blockboard faced with 2 mm HDF board, B1, DIN EN 13501-1 (C-S2,d0)
Thicknesses from 13-60 mm
Size 5,600/2,800 x 2,070 mm
Density e.g. 19 mm approx. 460 kg/m³ / e.g. 38 mm approx. 420 kg/m³

Lightweight furniture plywood board faced with 2 mm HDF board, B1, DIN EN 13501-1 (C-S2,d0)
Thicknesses from 13-55 mm
Size 5,600/2,800 x 2,070 mm
Density e.g. 19 mm approx. 490 kg/m³ / e.g. 38 mm approx. 430 kg/m³

Sandwich panel, polystyrene faced with 3 or 5-ply 3.5 mm HDF board, or 3-ply poplar plywood (4 mm).
Thicknesses from 19-100 mm
Size 5,200/2,600 x 2,070 mm and poplar size 2,490 x 1,800 mm
Density approx. 150-250 kg/m³ - Density poplar approx. 150 kg/m³
Polystyrene: 200 kPa (higher kPa available on request)
Also available with a frame construction in albasia and MDF board. Different frame widths available on request.

AeroSlide sliding door panel, Polystyrene faced with 3.5 mm HDF board, frame made of albasia (approx. 50 mm wide) and additional stabilising pine slat frame (approx. 30 mm wide). Calibrated surface.
Thicknesses from 40 mm.
Any size available on request
Density approx. 300 kg/m³

All our board products can be tailor-made to suit your purpose.

If you require different sizes or thicknesses, contact Merton A/S to learn how we can help you.

In addition to all the above, we offer a range of lightweight chipboard, MDF board and other types of board, which can be supplied with melamine, veneer and laminates.